Despite being a heavy cell phone user for more than 25 years, it only recently occurred to me that vertical navigation on most phones is inverted when compared to traditional computers. You swipe down to navigate upward, and up to navigate downward. I recently spent time using a MacBook, which apparently defaults to this “natural” scrolling (mobile-style), and I was completely thrown off by it.
I’ve been using natural scrolling on a couple of my own desktops ever since, mostly as a mental exercise, and I wondered…how many of you folks prefer this method?
Trackpads and touchscreens get the phone way of scrolling.
These feel like you are interacting with a piece of paper, so you move the paper around.Mousewheels get the traditional way of scrolling.
Mice are more like controlling something.
It just is. Like F1-F12 keys are always F1-F12 keys, not the alt-function (like media/brightness etc).I hate that Apple has called it “natural” Vs “reverse” in some psychological reconfiguring that you are going against the grain if you don’t agree with them (as opposed to them changing the established standard).
Good points all around, though I do use my alt-functions more than the function itself.
I use natural on the trackpad and traditional using a mouse.
It’s a good thing Apple doesn’t make cars. They’d put the gas pedal on the left just to be different, and claim it’s more “natural” that way.
Don’t give Tesla any ideas.
Yeah, they would probably let you pay a small fee per month for this feature.
My absolute biggest complaint with my BMW. The electronic gear shifter. Want to go backwards? Push the shifter forward. Want to go forwards? Pull the shifter backwards. Fucking genius! <\s>
Isn’t that somewhat accepted like with sequential transmissions pushing forward downshifts and pulling back upshifts
[This comment has been deleted by an automated system]
I never remember which one is natural and which one is reverse. When I use a mouse or a trackpad, I am moving the scroll bar. When I am using a touch screen, I am moving the content.
That makes sense and is probably the best no-nonsense rationale I’ve seen yet.
my idea is that when I scroll on the mouse, the bottom part of the scroll wheel touches the content
This makes sense to me too. The way I have always viewed it is that if you were to lay the mouse wheel on the screen itself, it would behave the way as if it were interacting physically.
deleted by creator
The thing you’re apparently calling “traditional” seems natural to me.
I’ve never really stopped and thought about it before, but as far as I can figure, my brain expects the part of the system that does or would actually touch the surface to drag the screen in a particular direction through the simple workings of physics.
On a touchscreen, it’s simple - it’s my finger actually touching the screen and it drags the screen around exactly as I’d expect.
With a mouse, my finger isn’t the important part because it’s not touching the surface (or more precisely, the mousepad that substitutes for the surface). Rather, my finger is contolling the mouse, and the underside of the mouse is touching the surface. And as far as that goes, the “traditional” way it works is correct - when I move my finger downward on the mouse wheel, the bottom side of the wheel - the part that would actually be touching the surface if it was a purely mechanical system - is moving upward, so would drag the screen upward.
So to me, that’s what’s natural.
I couldn’t explain this as good, but to me tradition has always felt natural. 100% on a mouse, but also mostly on a trackpad.
I think the big contention comes with touchpads. They are half way between a mouse and a touch screen. Traditionally they acted like mice, you two finger down to scroll down like on a mouse wheel - but you have no wheel so are directly touching the surface. Much more like a touchscreen.
So to me traditional feels natural to me on a actual mouse, but on a trackpad natural feels more natural. I really hate that on the Mac you can only set all mouse life devices one way and not be able to have actual mice behave different to trackpads like I can on Linux systems.
It’s the most logical thing, and yet some people give me a weird look if I explain these thoughts to them.
I can’t even begin to describe how wrong it feels to invert it. My entire being refuses to accept that.
(you do realize I’m agreeing with you?)
I never was able to completely realize that it’s the wheel that makes it intuitive — that pulling down on the wheel makes the bottom of the wheel pull the screen up. But it makes so much sense, and it’s why I use “traditional” scrolling on mouse.
It’s something I was never actually conscious of until I stopped and thought about it yesterday because of this thread. I’ve just always moved the scroll wheel in the way that it seems like it should work, and it works the way it seems like it should.
“Natural” only seems natural if you were raised mostly on touchscreen devices, I’ve never seen a desktop have inverted scroll like that.
On a side note, Why do so many Linux programs not support auto scrolling by default if at all?
I didn’t even know autoscroll was the name of middle clicking to scroll were your mouse went until I switched to Linux and noticed it missing in certain places.
I think it is because of Unix/X11 tradition of the middle mouse button being for pasting the most recently selected text.
I think the only place I’ve ever seen autoscrolling available was Libre Office, and I turned it off there because nothing else has it.
Firefox does too, but iirc it has to be enabled in about:config.
And fortunately for me, Firefox is the main place I want to use autoscrolling. It’s nice for reading long articles, or browsing lemmy threads… (I’m trying to think of other places I might want autoscroll. I don’t recall ever wanting to use autoscroll on a file browser or a settings window or anything like that. It would be good on a pdf reader though.)
i can’t even grasp how one can reads while the page autoscrolls down. When I had tried it I could only think about whether the scrolling speed is the absolutely optimal and if I make it on time or if it scrolls faster or slower than I read. Of course I couldn’t understand what I was reading since my mind was not paying attention at what I was reading, since it was occupied with the logistics.
For me it’s only useful with Firefox and the monitor running at 144Hz/fps. I used it for long webcomics, where constant scrolling is good enough to read the few lines. But otherwise I’m also not using it much.
Not in about:config, there is a setting in the normal preferences for that.
The nyxt browser also supports autoscrolling, but it isn’t activated by a middle-click.
There is nothing natural about “natural scrolling”.
[This comment has been deleted by an automated system]
It feels like gaslighting.
deleted by creator
I view it as controlling the scroll bar rather than the content. Down moves the bar down. Up moves the bar up.
deleted by creator
I guess it depends on what the base line is. When reading a large news paper for example, I presume most people hold it steady in their hand and move their head to progress. Which would be the “traditional scrolling”. If you assume a large scroll of paper (ancient egyptian style) I guess moving the scroll and keeping the head (mostly) steady works fine or even better. That would be the “natural scrolling”.
But yes, in modern times I can’t think of an equivalent of the scrolls to explain why we would consider that “natural”, if we don’t do it outside of the computer.
Natural is totally unnatural.
In the beginning, the mouse did not have a wheel. The only way to move the view was by dragging the scrollbar with the mouse pointer. So when we got mouse wheels, it was easy to just connect the wheel to the scrollbar. And thus the traditional direction makes sense since you are moving the scrollbar, not the view. With time, the scrollbars became more and more hidden, and we got a disconnect between what we were scrolling (the almost hidden scrollbar) and what we thought we were scrolling (the view). When you think of it as manipulating the view directly, the natural scroll makes sense. Because that is what we do in touch devices (manipulate the view directly).
That said, I use traditional scrolling because it’s what I am used to.
I think you’re right - but it’s slightly confusing that you’re using the word ‘view’ to mean the opposite of what the diagram in the OP means.
The diagram uses ‘view’ to refer to some kind of imaginary viewing window placed over a large static content; other way of putting it is that ‘view’ refers to a camera pointed at the content; and ‘content’ refers to the thing that you are trying to look at or read. In any case, I don’t think you’ve used the word incorrectly - but just inconsistently with what the post already had!
I didn’t even see that picture in the OP. What that diagram calls a view I would call a viewport. But yes, it would have been better to use the same terminology as OP.
Traditional with mice, natural with touchpads.
Interesting story, I used traditional scrolling with touchpads all my life until I spent three years exclusively using a desktop. Came out of it suddenly rewired to scroll like I do on my phone.
Traditional for mouse, natural for touchpads.
Yep, my Sway config has
input type:touchpad natural_scroll enabledThis is the way
Real gangstas also switch their PGUP and PGDN keys to natural scrolling.
Easy there Satan
I use traditional scrolling for everything except touch screens.
Traditional - unless it is fingers on the screen!
Down is down and up is up
Unless it’s a stick/yoke.
Pull is up, push is down.
Right?!! Consider this - if you replace the scroll wheel with two buttons, which one would you press to scroll down?
Traditional for both scroll wheels and trackpads (trackpads are emulating a mouse, you heathers!) And inverted Y for gaming.
I think trackpads emulating a mouse should be considered a poor implementation, a trackpad is different than a mouse and we should utilize that with the design. A trackpad is best imo when combined with gestures, almost as a hybrid between a typical touchscreen and mouse. For example pinching motions, two/three finger tapping, two handed use, etc are all options for a trackpad that don’t work (or work poorly) on a mouse.
I used to use inverted Y, but it stopped feeling right at some point in the Xbox 360 era and I switched.
I think it was the first console gen where FPS really took off. Like there were FPS on PC for a long time before that, and Halo was pretty big on the Xbox, but the PS2 ones were all kind of clunky and experimental.
I think I only used inverted Y to start with because the only first person games I used to have were flight sims.
I consider trackpads to emulate the touch of the screen (so like a phone). So natural scrolling for me.
Nah a touchpad feels more like a smartphone display than a mouse, so “natural” scrolling it is. Inverted Y for gaming too. I think it depends on what you grew up with - playstation and Xbox don’t use it per default but Nintendo (at least old consoles and games) does I think, so I cannot switch back to not inverted, it feels unnatural.
I used to play games with both inverted X and Y. But lately (last 10-15 years) inverted X was often not an option so I had to force myself to play both axis non-inverted. It took a few months but it feels natural now.
Inverted Y I get, but inverted X?
Explain yourself, weirdo.
That’s literally the same principle. And yes, before you ask, it’s dumb for both axes.
Up is up, down is down.
It’s not the same principle for both axes though. I invert just the Y-axis. For me, left is left, right is right, up is “back” and down is “forward”.
It is, if you consider the motion about the bottom part of the stick, when you push forward, that part moves backward. The same can be said about pushing right, and having the bottom going left.
Why would you want that? No idea, since even on planes the x axes are not inverted like that…
I see what you are saying about the bottom of the stick, but that isn’t the mental model of the people who invert the Y-axis. So that principle doesn’t really apply.
Consider it like plane controls. With the stick in a neutral position as pointing “up”. Left and right are still left and right. But forward and back tilt the nose, which is forward, down and up respectively.
