What about the Nutria? Literally named like it’s food!

This is true, but…

Moore’s Law can be thought of as an observation about the exponential growth of technology power per $ over time. So yeah, not Moore’s Law, but something like it that ordinary people can see evolving right in front of their eyes.

So a $40 Raspberry Pi today runs benchmarks 4.76 times faster than a multimillion dollar Cray supercomputer from 1978. Is that Moore’s Law? No, but the bang/$ curve probably looks similar to it over those 30 years.

You can see a similar curve when you look at data transmission speed and volume per $ over the same time span.

And then for storage. Going from 5 1/4" floppy disks, or effing cassette drives, back on the earliest home computers. Or the round tapes we used to cart around when I started working in the 80’s which had a capacity of around 64KB. To micro SD cards with multi-terabyte capacity today.

Same curve.

Does anybody care whether the storage is a tape, or a platter, or 8 platters, or circuitry? Not for this purpose.

The implication of, “That’s not Moore’s Law”, is that the observation isn’t valid. Which is BS. Everyone understands that that the true wonderment is how your Bang/$ goes up exponentially over time.

Even if you’re technical you have to understand that this factor drives the applications.

Why aren’t we all still walking around with Sony Walkmans? Because small, cheap hard drives enabled the iPod. Why aren’t we all still walking around with iPods? Because cheap data volume and speed enabled streaming services.

While none of this involves counting transistors per inch on a chip, it’s actually more important/interesting than Moore’s Law. Because it speaks to how to the power of the technology available for everyday uses is exploding over time.

I used KDE Connect on Ubuntu with Gnome. No issues.

Old school Unix guy here…vi,awk and sed are all that you need.

I’m not sure if traffic is “convenience” at this point. At least where I live, it’s a nearly essential piece of functionality.

In fact, for local driving it’s often the only reason to use a map app. I already know how to get to most of the places I want to go, I just need to know the best route to avoid traffic now.

You mean “flavour”, right? Another small but important difference.

Thank God somebody got it.

I think it’s a bit more than that. I think that the idea is that you simplify the problem so that the rubber duck could understand it. Or at least reformulate it in order to communicate it clearly.

It’s the simplification, reformulation or reorganisation that helps to get the breakthrough.

Just thinking out loud isn’t quite the same thing.

“Intercourse!”

In a way, this question itself is very “un-agile”. Agile should be always forward-looking, “What can we do next?”, “What can we get done in this short period of time?”, “What should we do next?”.

OK, so you found a possible “defect” in your system. Is it a defect, or did someone slide in a requirements change 3 months ago?

This reminds me of playing chess. Sometimes a player will make their move when their opponent is distracted. The opponent hears, “Your turn”, and they look at the board. “Which piece did you move?”. The first player just shrugs.

The point is that you shouldn’t need to know which piece just moved. Every chess position is a “state” of its own, and your best move should depend on going forward from that state, not knowing how the board changed recently.

It’s the same thing here. You have a situation. Does it really matter how, when, who or why it happened? It shouldn’t, and here’s why:

Just because it’s a defect (if it is) doesn’t automatically mean that correcting it moves to the top of your “to do” list.

It’s going to take some non-zero amount of time to change it back to blue. And when you’re doing that, you’re not doing something else. There is always an opportunity cost to doing bug fixes and you shouldn’t treat them in an ad-hoc way. Should you be spending that time, and who gets to decide if you do? It’s not your decision. It’s the PO’s decision to make.

Maybe the PO doesn’t care about the colour. Maybe they do care, but not if it means some other feature gets delayed. Maybe it’s the most important aspect of the whole system, and there’s no way you can launch with it green. So you cancel the current Sprint and start a new one dedicated to fixing this defect! Maybe they regret asking for it to be blue, and now they’re happy that it’s now green.

If it was me, I’d get a quick T-shirt size estimate on the work required to change it back to blue, then put it in the Product Backlog to be reviewed with the PO. Maybe have a quick chat with the PO, or send a memo about it. Maybe the PO will need to check with their SME to see if anyone remembers asking for it to be changed to green. Maybe not. In any event, it either makes its way into a Sprint Backlog or it doesn’t.

Also, if you’re doing Agile right, then your clients are getting constant, hands-on, experience with your system as it is being developed. To go 100 days without some kind of “release” that they can play with and give you feedback is an anti-pattern. If you are giving them the latest version every week or two and after almost three months they haven’t noticed that the footer is green, then it’s probably not important.

On to the actual question. Jira is a potential sand trap of administrative complexity. The answer is usually to keep everything smaller. Smaller features, and smaller Sprints. Smaller teams. A team of 5 or 6, working in one week Sprints, can only do so much per Sprint. If your fundamental unit of work - a story, or a feature, or a ticket - is set to take something like 1/2 day and forms the basis of your Sprint Backlog, then each programmer on the team can do at most 10 SB items (in a perfect world). Depending on the composition of your teams, you’re probably going to have only about 3-4 programmers - which means 30-40 tickets per Sprint Backlog. And that’s a blue-sky number that’s practically impossible in a world with meetings. A team of 5 or 6 is going to complete closer to 20 Sprint Backlog items in 1 week Sprint in the real world.

The point being that 14 Sprints is your 100 days and each Sprint has about 20 easy-to-understand items in it. Whatever your management tools, it’s a failure if you can’t locate those 280 features in a matter of seconds. And it should be easy to eliminate 270 of them as not possible places where the change happened just from the description.

And when those SB items are small, as they should be, it’s not an onerous task to document inside them the requirements that they are supposed to meet.

When you have 1 month Sprints with tickets that take 2 weeks to complete, then everything becomes a nightmare. It becomes a nightmare because it’s virtually impossible to impose some kind of consistent organizational structure internally on free-form stuff that big. But it’s almost trivial to do it with tiny tickets.

And the other thing that happens with big tickets is that there’s tons of stuff that programmers do without thinking about it too much. If you’ve got two weeks to finish something, then there’s a ton of latitude to over-reach and the time estimate was just a wild guess anyways. If you have 3 hours to do something, then you’re going to make sure that what you need to do is clearly laid out - and then you have to stick to it or you won’t get done in time.

Did somebody “fix” the inconsistent footer colour while doing some huge, 2 week, ticket? Good luck finding out. But that’s not going to happen with tiny, well documented tickets.

My first experience with this food was in Halifax decades ago. The Halifax Donair is a unique thing.

And it’s definitely Donair, not Doner.

Technically, he would have three drives and only two drives of data. So he could move 1/3 of the data off each of the two drives onto the third and then start off with RAID 5 across the remaining 1/3 of each drive.

Deal with the ethernet port issue by purchasing a 5 port ethernet switch. Maybe the rest of your issues go away?

As a Canadian driving around the UK I always found these signs strange. When passing one we would raise our fists in the air and shout, “End road work…end road work everywhere!!!”.

It amused us.

For me Bazzera Magica and Baratza Vario grinder some time back. Better coffee than most cafes.

I looked and Python has the library support for the GPIO and to do background threading to poll pins. My preference would be to go with a JVM language like Kotlin, but then I’m a programmer. Python, from the little that I’ve mucked about with it is really just one step in complexity from scripting. Maybe even easier, because some things in shell scripts are super difficult to do.

Maybe then you need to move one stop up from scripting into something closer to actually programming. I’d be surprised if Python doesn’t have the library support on a Pi for dealing with both serial and GPIO I/O.

the end stop in external to the serial communication

Does this mean that you have some kind of other signals or pin-outs? If so, this is starting to sound like a great project for a Raspberry Pi, because the GPIO pin array can handle that.

Keep in mind that it has been decades since I last used Kermit, but I’m pretty sure the use case it was originally designed for was…

Connect to a serial port, which had a modem attached. Talk to the modem and get it to dial a number. Presumably, the remote end answered and the port attached to its modem would issue a login prompt. Negotiate the login and then issue a bunch of commands to change directories and then launch Kermit on the remote system. After that Kermit to Kermit communications took over until you terminated the session. Finally, log off the remote system and hang up the modem.

All of this stuff could be done via scripts. I seem to remember that it would actually wait for a response, and then parse the response in the script. I don’t remember ever doing polling loops.

If you’re on a *nix box of some type, it’s totally possible to open up a serial port for manual I/O even in something like a bash script. Even if you have to reverse telnet to a terminal server.

Kermit on top of FTP can work really well. Kermit has its own communication and transfer protocol, IIRC, but updates in the 1990’s allowed it to be used with TCP/IP and FTP. So you can write a script to log into a remote system, run some commands and then initiate a file transfer. The scripting allows you to wait for responses and act on them.